Wednesday, November 19, 2008

NASA Successfully Tests First Deep Space Internet


PASADENA,NASA California. has successfully tested the first deep space communications network modeled on the Internet.
Working as part of a NASA-wide team, engineers from NASA's Jet Propulsion Laboratory in Pasadena, Calif., used software called Disruption-Tolerant Networking, or DTN, to transmit dozens of space images to and from a NASA science spacecraft located about 20 million miles from Earth.

"This is the first step in creating a totally new space communications capability, an interplanetary Internet," said Adrian Hooke, team lead and manager of space-networking architecture, technology and standards at NASA Headquarters in Washington.

NASA and Vint Cerf, a vice president at Google Inc., in Mountain View, Calif., partnered 10 years ago to develop this software protocol. The DTN sends information using a method that differs from the normal Internet's Transmission-Control Protocol/Internet Protocol, or TCP/IP, communication suite, which Cerf co-designed.

The Interplanetary Internet must be robust to withstand delays, disruptions and disconnections in space. Glitches can happen when a spacecraft moves behind a planet, or when solar storms and long communication delays occur. The delay in sending or receiving data from Mars takes between three-and-a-half to 20 minutes at the speed of light.

Unlike TCP/IP on Earth, the DTN does not assume a continuous end-to-end connection. In its design, if a destination path cannot be found, the data packets are not discarded. Instead, each network node keeps the information as long as necessary until it can communicate safely with another node. This store-and-forward method, similar to basketball players safely passing the ball to the player nearest the basket means information does not get lost when no immediate path to the destination exists. Eventually, the information is delivered to the end user.

"In space today, an operations team must manually schedule each link and generate all the commands to specify which data to send, when to send it, and where to send it," said Leigh Torgerson, manager of the DTN Experiment Operations Center at JPL. "With standardized DTN, this can all be done automatically."

Engineers began a month-long series of DTN demonstrations in October. Data were transmitted using NASA's Deep Space Network in demonstrations occurring twice a week. Engineers use NASA's Epoxi spacecraft as a Mars data-relay orbiter. Epoxi is on a mission to encounter Comet Hartley 2 in two years. There are 10 nodes on this early interplanetary network. One is the Epoxi spacecraft itself and the other nine, which are on the ground at JPL, simulate Mars landers, orbiters and ground mission-operations centers.

This month-long experiment is the first in a series of planned demonstrations to qualify the technology for use on a variety of upcoming space missions. In the next round of testing, a NASA-wide demonstration using new DTN software loaded on board the International Space Station is scheduled to begin next summer.

In the next few years, the Interplanetary Internet could enable many new types of space missions. Complex missions involving multiple landed, mobile and orbiting spacecraft will be far easier to support through the use of the Interplanetary Internet. It also could ensure reliable communications for astronauts on the surface of the moon.

The Deep Impact Networking Experiment is sponsored by the Space Communications and Navigation Office in NASA's Space Operations Mission Directorate in Washington. NASA's Science Mission Directorate and Discovery Program in Washington provided experimental access to the Epoxi spacecraft. The Epoxi mission team provided critical support throughout development and operations.

Tuesday, November 18, 2008

POLYMERIC COMPOSITE MATERIALS FROM COAL


Coal is a complex macromolecule/polymeric (if sulfur & nitrogen is not taken in
consideration for monomer units) organic rich component, but cannot be used as polymer.
Although free electron are available on the surface of the coal but it does not behave like
conducting polymer or temperature sensor. Importance of high performance engineering
plastics is increasing day by day. The monomer for this is being synthesized in about 16 steps
from single aromatic system/compound. Coal can yield monomer in a single step by its
degradation. Coal has to be suitably choiced for getting specific monomer.
Keywords: Coal; polymeric, Composite, Materials.
3N Nitric acid oxidation of coal introduces nitro groups besides degradation. The
solubilization of oxy coal in acetone enhanced due to the presence of nitro group. The acetone
soluble part of the coal contained carboxylic acid functional groups in large amount i.e.
12.6%. After its interaction with aniline, the percent carboxylic acid functional group
declined from 12.6% to 1.68%. Aniline interacted with carboxylic functional groups in two
steps, in the first step it formed anilide, and then carbonyl oxygen of anilide further interacted
with another molecule of aniline and formed a stable compound which is a composite material
and acts as conducting polymer. Thus for the first time conducting polymer from coal has
been prepared.
Oxidation of coal can reduce the complexity of coal by its degradation and can be
used in preparation of monomers,poly aromatic chemicals, organic conducting polymers,
organic temperature sensors etc. Studies are being done in the field of conducting polymers
such as poly aniline (PANI) and amine functional aniline acetaldehyde condensate (AAC) by
using pure compounds .The objective of the work is to replace metal based conductors (AAC)
by cheaper organic polymeric materials . Most of the researchers in different countries
carried out polymerization of aniline following the same protocol. Polyaniline (PANI) exists
in a variety of forms that differ in chemical and physical properties [1]. The most common
green protonated emeraldine has conductivity on a semiconductor level of the order of
100Scm-1, many orders of magnitude higher than that of common polymers(<10-9Scm-1 ) but
lower than that of typical metals(>104Scm-1 ).
EXPERIMENTALS:
Proximate and Ultimate analyses have been done by standard methods prescribed in BIS [7].
Estimation of functional groups like hydroxyl (-OH), carboxyl(-COOH),Carbon methyl have
been done as reported.(ref.8) 10g of Samla coal was taken in a flat bottom flask and to this
added 100 ml of 3N HNO3 solution for oxidation at refluxing temperature for 8 hours. After
completion of the reaction, the solution was filtered with excess of water till it is acid free. Now
the residual part of the treated coal i.e. oxy coal was extracted with acetone as per solvent
extraction procedure. Soluble and insoluble fractions of acetone extracted part were
characterized by proximate & ultimate analyses. Acetone soluble fraction of oxy coal was
treated with aniline for making polymeric adducts as follows. 1.0 gm acetone soluble fraction of
oxy coal and 30 ml of aniline were taken in a flat bottom conical flask in dry condition and then
refluxed for 10 hrs at 700C.

Tuesday, November 11, 2008

3 common remedies to cure sunburn's

Well today sunburn is a common problem to common masses,everybody wants to cure sunburn and become fair.
• 1. Take a luke warm no-soap shower without rubbing your skin with anything such as a wash rag (which can be rough and aggravate sunburned skin) or a loofah or towel. Just rinse the sweat, lotions, etc. off your skin. Do this for about 10 minutes. Note: If washing hair, be sure not to let shampoo run over sunburn, as this will highly aggravate it. Do not stay in the water longer than this because to much water exposure right after a sunburn will dry out your sunburned skin even more making it even more itchier. But rinsing off the residue is a must as described above in order for sunburn products to work.

• 2. Get out of the shower and "pat" yourself dry with a towel. DO NOT RUB SUNBURNED SKIN WITH A TOWEL!

• 3. Now, this next step you have to be a believer. I ignored my dad for years about this suggestion. Kids never listen to their parents. I am sorry I ignored his suggestion for so many years. (This is the main part of this remedy. It has to be done within 24 hours). Important: I have not tried this remedy on children. So, I only advise this for adults.

If you have a clean spray bottle (like one you buy to put water in for spraying hair or body when sunbathing) fill it up with ordinary every day vinegar. Yes, I said vinegar. You say "I am not spraying that stinky stuff on my body. This woman's nuts." Well, don't shoot it down until you've tried it. Don't be ignorant for years like I was. LOL Believe me. The smell almost totally vanishes from your skin after about an hour. I go to the store without feeling self-conscious about the smell because it's almost undetectable unless someone puts their nose on your skin and sniffs. (And if they do that then they have strange problems.) Spread a towel on the floor/carpet and move any unnecessary objects you don't want sprayed out of the way. (For arm spraying -I usually stand on the towel and lean over the sink). Spray the vinegar on your sunburned parts ONLY. Let it drip and dry. DO NOT RUB! If severely burned spray lightly again on sunburned area after a few minutes. You may pat vinegar after about 5 minutes if still dripping. Usually, the vinegar is dry by 5 minutes or less. After vinegar is dry, you can get dressed. I have never had dried vinegar on my skin damage any of my clothes. Wear comfortable clothes which are not tight or covering sunburned area(s) if possible. The sunburn needs to be exposed to air and not covered. I am telling you, on my skin, this vinegar is a miracle worker. It's a wonder product. Meaning, I wonder how it works so well.
Immediately after applying to my skin, I feel relief. My sunburn does not itch, does not sting, and does not hurt. You may still get joint point from a deeper burn but not on the outside. NO skin pain. Let me just say...my skin is unusually fair and highly sensitive to everything. When I sunburn it feels like poison ivy without the rash. Extremely itchy, lobster red, unstoppable stinging, and very painful. I am extremely light complected. Before this relief was out of the question. Believe me. You don't have to be in miserable sunburn pain anymore! I'll bet not many people have worse skin for burning than me. This works and you have got to try it. Make sure you are not allergic to vinegar or anything in it. I wasn't....amazing. I use distilled white vinegar. After using the vinegar I can go watch TV, tend to my kids, and even sleep well. Wow! For me, this is an absolute solution which I have been doing for about 3 years. If only I would have listened to my dad sooner. I thought I'd be miserable every summer for the rest of my life. I used to get in a bad mood instantly when I got sunburned knowing what I would have to go through, but now I know that I can help my sunburn and feel comfortable. I wear sunscreen on long days in the sun, but if it wears off or I missed a spot and I get burned, or if I go to an unexpected place and don't have my sunscreen with me and I get burned, at least I know relief is around the corner. Although I advise always wearing sunscreen to protect your skin from burning and skin cancer, sometimes you don't have it on hand or with you. I believe the vinegar actually helps heal and repair your skin.

The next step after the initial step above is to apply the vinegar again approximately 4 hours later, or if your skin starts burning again. Results will vary with individual people. After second or third application of vinegar, I suggest a product that goes hand in hand with the vinegar. This is an ever so important part of my remedy. After 3 or 4 coats of vinegar or the next day...whenever stinging stops without using the vinegar (usually the next day), apply Banana Boat Aloe After Sun Lotion. (See my Epinion article on this product called "Not Just For One Use...But 5!") If you are not severly sunburned, after 2 coats of vinegar the stinging should stop. After Sun is never greasy. Applying the After Sun Lotion gives your skin a calm, cooling, refreshing sensation while replenshing your skin with moisture, aloe vera, and vitamin E. This cream colored lotion can be used on all areas of the skin on your body, including the face. After Sun can be purchased at any store having a Health/Beauty section. This lotion can be used as a daily moisturizer also. Apply the After Sun every 4 hours. If done faithfully, according to my experiences, severely lobster-like sunburned skin will NOT peel and be dry. Therefore you keep your tan. For me, 95% of the time I did not peel. Wow! Again, for me, this a truly remarkable accomplishment. I would not spend all this time writing about this remedy if it did not work so well for me. I hope it works for you as well!

While doing the remedy listed above...if I'm extremely sunburned, I also drink 3 full glasses of water over the course of the day since our skin is deprived of so much water when sunburned. I believe this helps also in replenishing lost water to the skin. If it's hard for you to drink that much water at least drink 1 or 2 full glasses.

7 uncommon vehicle design concepts which i like the most

Automobile designs:Well day 2 day this society present over here is modernising& living standard of common masses is also rising 2 an optimum level so 2 fulfil these needs designers design latest vehicles which are quite uncommon.These designs are most liked by me...
1.enigma concept by paul howse
2.iomega concept by joonas vartola
3.concept car by ilaria sacco
4.commended: phoenix concept by sergio loureiro da silva
5.winner: airflow concept by pierre sabas
6.Future cars predictable designs are,commended: noah concept by jung hoon rhee
7.nereus concept by ceri yorath

Friday, November 7, 2008

"COAL CARBONIZATION AT CFRI"


The fossil fuel especially coal is a major energy source. It is converted to differentforms of energy by controlled technologies like coal carbonization, liquificationand hydrocarbonation.
Coal carbonization processes, namely producer gas production
(400 to 500 °C), low temperature carbonization (LTC, 600 to 700 °C) and
high temperature carbonization (HTC 900 to 1100 °C) are employed to produce
coke, tar and gases for different uses.Coke making had been one of the major pursuits of CFRI since inception.
Fundamental research on coal science and the carbonisation process found
its applications in the development and transfer of various technologies
on HTC coke, formed coke, briquettes, soft coke at different point of
time. Keeping in view the gradual depletion of indigenous good
quality coking coal resources , R&D initiatives at CFRI provided the
scientific basis and scope of utilising different type inferior grade coals
as blend components for metallurgical coke making. Application of
the knowledgebase backed by validation tests in pilot plants has
helped in optimising the blend components for various steel plants
utilising both indigenous and imported coals.